Emptying a Shark cordless is usually quick and easy, but the process is a bit different than with Shark corded vacs.. You should check the manual for specific instructions, but here’s the method for emptying the Shark IZ251UK:.
When you’ve finished cleaning the canister, take a look at the cyclones..There is a thin mesh that goes around the cyclones that can often get clogged with fluff.
If this is the case, use a soft, damp cloth to gently remove it to restore suction.. Make sure the canister and cyclones are fully dry before you reassemble the vacuum cleaner..The cyclones should never be immersed in water or even run under a tap.Only use a damp cloth to clean them..
Step 4: Check the Hose and Wand for Clogs.Remove the wand, then visually inspect it for blockages.. Next, take a look at the hose to see if there are any blockages.
If you can remove the hose, then you could also try (gently) pushing the end of a broomstick through to see if there are any clogs deeper in the hose..
If you don’t want to remove the hose, then you can visually expand it section by section while looking for darker clogs inside or breaks in the hose..Replacing a vacuum belt is a relatively simple job, but it can be daunting if you’ve never done it before.
We hope this article has given you the confidence to try when your vacuum next needs a new belt..The good news is that most modern vacuum belts last years before needing to be replaced, so this isn’t a repair job that you’ll need to perform frequently.. Do you have any questions about how to replace a vacuum cleaner belt?
Or is there a specific model or brand you need help with?Let us know in the comments section below.Is your home covered in pet hair?